|
The ALMiG BELT is a single-stage rotary screw compressor with oil injection technology, standard low-noise enclosure, ALMiG AIR CONTROL I or III microprocessor, totally-enclosed TEFC motor (ODP motor standard on BELT 75 and BELT 250) with Y-Delta starting and reliable belt-drive transmission. The compressors are designed for indoor and outdoor installation.
Think Green! Save Energy!
The ALMiG AIR CONTROL 1 and 3 is optimized and programmed for reducing both the energetic and mechanical consumptions. We all know that when the motor is not running it does not consume electric power so the goal is to let the electric motor work for the shortest period of time during idle operation.
ALMiG controllers always monitor the operation cycles to recognize high energy consumption and optimizes the idle operation time. Thinking green doesn’t have to mean making monumental changes, with right equipment from ALMiG you can make even your existing compressors more efficient!
General technical information
Main motor rating: 5 - 350 hp (Tri voltage motors are standard up to 50hp)
Pressure up to 190 psi(g)
Flowrate: 20 - 1550 cfm
Cooling System: Air cooled, Water Cooled, Sea Water Cooled
Due to its unique design it operates at any ambient conditions even as a marine compressor for navy applications or on drilling sites in Texas! The smaller range up to 50 hp can be equipped with a technical oil free sollution or just with a dryer called "plus version".
- Unit manufactured in accordance with UL, ASME, CSA, CRN, OHSA and CE standards
- Load / No-load operation as standard, optional equipped with modulation (throttling) for capacity control
- Compact build for installation near walls; operation from one side
- Ready for connection and operation, fitted with all the required cooling, control and monitoring equipment
- Vibration-isolated, fluid-tight base frame for foundation-free installation
- Air end and motor isolated from the base frame to reduce vibration
- Sound-insulated with dirt-repelling lining and cooling air control system for extremely low noise level
- Integrated electrical control cabinet certified by UL and CSA.
- Main switch installed internal or external depending on the compressor hp class.
Other features:
- Electrical TEFC NEMA premium eff. motor (ODP motor standard on BELT 75 and BELT 250)
- Power transmission with V-belts – low maintenance cost, flexible and extremely efficient
- Drive system with increased lifetime
- ALMIG intake valve with intake filter for safe, fully unloaded start-up. Therefore an efficient and economical operation
- Oil-injection-cooled compressor stage featuring high operational reliability
- Oil sump tank for best pre-separation
- Impact separation and gravitational separation design
- Oil drain through pre installed ball valve
- Easy to fill and impossible to overfill
- Spin on oil separator cartridge for high compressed air quality and low residual oil content
- Efficient oil and air cooling system.
- Industrial-grade, treated aluminum
- Easy to clean
- Oversized for low outlet temperatures
- Turbine or axial fan for optimum cooling airflow and extremely low noise level
- Emergency stop function
- Automatic restart after power loss
ALMIG USA Corporation – Quality Assurance
All ALMiG products are tested in the United States prior to shipment to ensure high quality and reliability. The unit comes with an optional 5 – year warranty program for coolers, motor, air end and controller
 Download catalog for BELT Range (971.82 kB)
|
